Відео

Are those the titans for insulated terminals...like 17 bucks... or the ones for heat shrink connectors like 40 bucks

I have the same gun. We need for it to work with plus it’s but need the longer mandible/bolt. Can you tell me which one to get for 1/4 inch? The instructions for the fun say to for use with plus nuts so we’re thinking about trying something different

Which exhaust system have you used?

With insulated 16 gauge stranded copper wire - do you prefer to use the pink(16-22) heat shrink connectors or the blue (14-16) heat shrink connectors?

That's not what military radio communications sounds like, that sounds like some guys that watched a few to many Hollywood movies

that's so cool!

I just ordered the mini tanto version of the Samior

I'm guessing your mate is still wondering who he lent that tool too🤣Nice video, great explanation, Thanks.

This was really helpful! I just acquired a metal pickguard for my bass guitar that requires finishing. I was told to get a deburring tool to smooth out all the rough edges but I didn't know what it was or how to use it. I picked one up today, watched your video, and now I feel like I'm ready to give it a try! (testing on a piece of scrap metal first!) Thank you!

Noticed your L track along the column where the bed attached. It looks pretty stable and sturdy. I got transit passenger as well, figuring out how to add bed. Please Advise.

promo sm

This plug/socket standars is a failed concept that should have ceased to exist.

ceo is a scam, all these knife are not worth 20 dollars

Thanks! I am receiving my FIRST Riv Nut tool kit today from Amazon.I can use any cordless drill to do the same thing, there is a video showing how to do this.

Thanks. If you ever need to calibrate the temperature, the lowest line on the guage = the thermostat opening temperature ... easy as that. If you have a dial type clock there are a set of contacts that close with a clock spring - spiral, and the contacts just need cleaning, Old timer from when they invented dirt, I should have patented it.

That's a really clean looking FJ! Thanks for the video.

Nothing better!

Looking great! l love the old Land Cruisers. WG7D

Mechanical voltage regulator: that is from a different era of engineering. Thank you for the circuit explanation and repair journey.

Excellent video for the Information!

I’m seeking insight to how to set 3/8 nuts of either type. I thought it was a strength failure on my part.

Very clever. This technique might be useful on the inlet flange surface of Amal carburetors.

Thanks for doing the investigative work for us. On the first video, I thought the white LED wasn't much of an improvement, but the camera angle on this one shows the increase in brightness. I was about to wire in a flasher relay with a regular LED bulb and saw this post on the TW200 forum. Thanks for steering me in the right direction!

Just got one of these,,, won't go into gear... Great information. Thanks...

Super helpful. There's a lot of discussion online about problems with rivnuts and plusnuts. You cleared up a lot of that fog,

use the white 1 so it lights up the license plate properly

I respect your views and opinions so i bought the white one from the last video. Good thing i am a cheap bastard and don't use my TW200 too much on the street so i will keep my white ones.

How to make a simple bike real complex....ok George Jettson

Great review!

You make me want one of these

Cool thx

Thanks for including the link, but the link shows an 1157 part number, a 3157, or a 7443. Can you confirm which one it is? I'm guessing 1157 but I want to be sure.

Was this before or after all the flooding in Death Valley?

Could you please provide a link to the 3M you use? Thank you.

Thank you for this practical, useful upgrade, very nice precision Fluke meter. I appreciate your thoroughness explaining the unique pin configuration on the bulb. The average person might miss that and cause some serious damage. Also very thoughtful explaining that the gasket may stick to the tail light lens and that you don't need an electric screw driver to remove or reattach it. A hand operated screw driver is the correct tool. Perhaps my wife and I will see you and your father at a Rally this year.

Whoa--hoh hoh..what..do we have here, from the memory bank of yester-year? A '74'ish Super Rat?..Super Combat?? (not quite the connoisseur I used to be ;-) And that pipe! A "Harry Taylor Strictly Hodaka" upgrade maybe? What a specimen.. Suddenly life is more simple, my hair is thicker and longer, my bones don't hurt, I have my favorite cassette playin' in my Pioneer Super Tuner and I'm not liking that gas is now up to 79 cents per gallon. I think I went thru the whole video without the LED upgrade (which I'm a huge fan of) even on my mind..😂 Thanks for the video, and the flashback😉😎👍

I'm also doing a sprinter van and used self tapping screws for everything. Its all ripped out of the walls even light things like 10lbs. Pretty thin trash steel on this 2020 compaired to my older 2008 and 2004 self tapping screws held for 16 years, this one doesn't make 2 weeks and they all ripped out.

Seems like a washer and a cordless drill would do the work of the pneumatic setter.

Awesome! Been following his channel for quite a while and look forward to making a pilgrimage in my Revel.

If you care about the future of your free country the Chinese samior is unacceptable. The CEO is Taiwan made and politically aligned.

I can't believe that HeavyD drove that water tank up there !!!

It reminds me of what someone called Tibet....: "The roof of the world!"

Do any of these pass through Audio for the speakers of a car?

I see many comments stating that the Mandrel SOCKET HEAD CAP SCREWS must be purchased from the manufacturer. NOT SO. The screw used in the mandrel is not special. This is a common Grade 8 Imperial Socket Head Cap Screw. This can be purchased in Grade 8 or lower grades in Metric also at your local Ace Hardware store. No need to order from the Manufacturer. DO NOT USE STAINLESS MANDREL'S. Purchase the black oxide colored ones. If you break them frequently, recheck your pneumatic gun or manual tool torque settings.

That air tool is only meant for riv nuts. I just clicked the link (i need a new one for work specifically for plus nuts because the ones we have keep breaking down) and it specifically says that you aren't supposed to use it to install plus nuts. That and the mandrel is a unique part from the manufacturer, not just some bolt you can replace easily from a hardware store

Excellent video

Also with PLUS NUTS, You can add a washer to increase surface contact.

Great vid. I was set on rivet nuts for a project soon. After watching your video I learned about plus nuts and will be going that route. Now to find a good gun! Thx

Thank you so much! Subscribed!

Fantastic filming, where is it being filmed, the marina and boats look fabulous 👌